Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
  • X8 Titan RTK Surveying UAV
    Sony A7RII 3 Axis 32Bit Gimbal With Yaw Encoder
    This is a great 3 axis 32Bit gimbal for a Sony A7RII camera. We have added a yaw encoder to give the gimbal more advantages. The yaw encoder is a As5048A via PWM and we also added a slip ring for 360 degree operation. The gimbal is all setup and tuned and includes SimpleBGC 2.63b0 firmware. Includes a protective case and cable for power. We offer additional options that you can add to this gimbal like auto geo-tag, remote camera controls and HDMI video output.

    Contact us if you want to use a different camera and we can build and tune it for you.

    Specs:

    - 1pc. 4108 Brushless Motors
    - 2pcs. 4310 Brushless Motors 
    - AS5048A Yaw Encoder
    - Yaw Encoder Slip Ring
    - Support sensitivity parameters adjustment and software 3D display
    - Support joystick rate mode and position mode
    - Support receiver: normal receiver, PPM receiver, DSM2/ DSMJ/ DSMX receiver
    - Support remote control device: PPM/ PCM/ 2.3G
    - Working voltage: DC 7.4V-14.8V
    - Working current: 200mA-2
    - Processor: MEGA328P processor
    - Sensor: MPU6050 3 axis gyroscope, accelerator meter
    - Max angular speed rate: 2000degree/ SEC
    - Max accelerating speed: 16g
    - Control frequency: 1600Hz
    - Motor driving frequency: 8/32 KHz
    - Control precision: 0.1degree
    - Control angle range: -45---45degree (roll), -90---90degree (pitch)
    - Firmware: Simple_BGC 2.63b0
     

    Using encoders with gives the following advantages:

    1. Prevents motors from losing synchronization and skipping steps.
    2. Provides the information about frame angle and angle of the camera relative to frame, that can be important for some kind of applications.
    3. For many cases it can significantly decrease power consumption by using field-oriented control strategy to drive motors.
    4. Increases instant torque in the same way.
    5. Allows the controller to get information about the camera balance for automatic balancing (with help of extra DC servo motors and moving counterweights).
    6. The firmware also retains an option to adjust camera position by hands.
    7. Increases the precision of stabilization by applying FOC-specific compensations.

    Capabilities

    Possibility to manage the system on different platforms
    Desktop systems: Windows, macOS, Linux. The firmware of the controller is user upgradable (through the GUI).
    Smartphones: Android and some control from 3rd party vendors for Apple's iOS product (iPhone and iPad).

    Open Serial API
    Open programming interface for development of external control modules — both for software configuration and control of the board and for communication with various electronic devices.

    Automatic tuning of PID parameters
    Automatic tuning of PID parameters allows you to quickly prepare the system for work either at the initial settings or at changed conditions.

    Support of systems with various hardware configurations
    Flexible customization of the sensor orientation.
    Support for a wide range of motors of various configurations and sizes.
    Support several configurations of motor orders, including configurations with the tilted motor axes.

    Support for two IMU sensors and external IMU for maximum precision
    The system works with either one or two IMU sensors. The use of two sensors improves stability and accuracy in non-encoder version.
    Optional connection of a MavLink-enabled auto-pilot extends precision for demanding applications
     

    Support for wide range of absolute encoders
    Installing encoder on each motor greately improves system performance and extends the range of applications

    Different algorithms of follow mode
    Flexible configuration of the follow mode for each axis.  Automatic switching of horizon axis mode from lock to follow in case of persistent camera tilt.

    Up to five user-configurable modes of system operation selectable with a toggle button
    5 profiles grouped in 5 profile sets allows  changing modes of operation or even hardware configurations on-the-fly 

    Support of a wide range of external control protocols
    Futaba, Spektrum, 5x PWM, Sum-PPM, 3 ADC, Serial API
    Flexible configuration allows for control of any functions of the system (every parameter that the system uses is configurable).

    Battery voltage drop compensation
    Battery voltage drop compensation ensures proper control of the drive motors during the whole life of the battery.

    Different versions of the controllers for different needs
    The licensing system allowed our partners to launch different versions of controllers for a wide range of applications: from compact controllers for stabilizers of light cameras to powerful ones for the stabilization of heavy units.

    Ongoing work to improve the system
    BaseCam Electronics is working closely with the developers of end devices, which allows us, on the basis of feedback,  to continuously improve the stabilization algorithms and expand the capabilities of the system within a single version of the controller.

    View Write Review
    Add to Cart
    $1,849.99
  • X8 640 R Thermal Mapping Quadcopter Drone with RTK GNSS GPS (X8 640 R Thermal Mapper)
     Aerial surveying/mapping quadcopter X8 drone with Flir 640 R, Sony A6000 camera, telemetry, FPV, aerial video downlink equipment and RTK GNSS GPS unit. This drone is ready to fly and includes - 650mm quadcopter X8 version carbon fiber foldable frame with landing gear, Pixhawk auto pilot flight controller, RTK GNSS GPS, Ublox M8N GPS with external compass,  GPS stands,  6pcs 6cell 5200mah lipo batteries, 10ch 2.4GHZ TX & RX, 3DR Radio, Flir 640 R, Sony A6000 camera surveying camera, 3 axis brushless gimbal, laptop ground station, custom carrying case, 7" FPV screen, video TX, OSD, Power Module with current and voltage sensor, low voltage alarm, buzzer, 8 - Blheli 30 amp ESC, 8- 5010 brushless motors with 14*5 carbon fiber props and 6 LEDS on the rear of the drone.
     
     
    This surveying/mapping quadcopter drone is fully configured out of the box and is capable of auto flight with waypoints, RTL and even follow me mode. The TX comes configured with six flight modes and 2 channels control the yaw and pitch of the gimbal. With the included Sony A6000 and Flir 640 R you can take professional aerial photos for surveying, mapping and geo-tagging images. The thermal camera automatically saves GPS coordinates to the EXIF data of the photo so it saves you time. Another great feature of the thermal camera is the ability to get live temperature readings and it saves the temperatures of every pixel to the image. To save time upgrade and add the auto geo-tag module so you do not have to post process the images. The RTK GNSS GPS gives you up to centimeter precision so you can create highly accurate 2D/3D maps. With the included ground station, you can easily create a autopilot mission to survey a piece of land. The ground station also features software to easily geo-tag aerial photos for 3d modeling. The hand-held transmitter gives you remote access to both cameras' shutter via a switch. The included 3DR radio and OSD will transmit flight data to the included 7" FPV and overlay it onto the live video feed from the Sony A6000 and Flir 640 R. You can change the live video transmission via a switch on the transmitter. There is an auxiliary port on the transmitter that can be programmed to change different settings on the thermal camera (e.g. color palettes, zoom etc.) The included 2.4ghz radio has built in telemetry so you can see the main lipo battery voltage,TX voltage,RX voltage and even RSSI on the radio screen. You can also use the awesome function Follow Me mode in Mission Planner. This is a very powerful and stable X8 quadcopter. Some of the benefits of  this X8 quadcopter is the ability to handle higher winds, higher altitudes, more power,more stable, longer flight times and even have 4 motor failsafe. That's right if four motors stop working you can safely land the drone as long as there is at least one motor working on each arm. Both beginners and advanced pilots will love to fly this drone and will have no problem learning all the features. 
     
    Some of the many uses of this X8 Surveying Drone include: 
     
    • Surveying
    • Search & Rescue
    • Aerial Photography
    • 3D Mapping 
    • Geo-tagging Photos
    • Real Estate
    • Inspections
    • Farming
    • Security
    • Anything Else You Can Dream Of
    •  

    X8 Thermal Surveying/Mapping Drone
    Package Contents you will receive: 

    Fully Assembled RTF 650mm X8 QuadCopter Carbon Fiber Frame 
    Pixhawk Auto Pilot Flight Controller 
    Protective Canopy
    Ublox M8P RTK GNSS GPS
    Ublox M8N GPS
    GPS Stand
    External Compass
    2.4GHZ 10ch TX with Telemetry
    2.4GHZ 10ch RX
    Sony A6000 Camera with 16-50mm Lens
    Flir Vue Pro 640 R (Radiometry)
    7" 5.8ghz Diversity DVR FPV Screen
    Live Video Downlink
    OSD (On Screen Display)
    2 Channel Video Switch
    3 Axis Brushless Gimbal For Sony A6000
    915MHZ 3DR Telemetry Radio
    Power Module with BEC -Voltage and Current Sensor
    Low Voltage Alarm
    LED orientation lights
    6pcs 6cell 5200mah Lipo Batteries (installed parallel)
    8pcs Blheli 30amp High Voltage ESC 
    8pcs 5010 Brushless Motors
    16pcs 14*5 Carbon Fiber Props (4-cw, 4ccw)
    Lipo Battery Fast Charger 
    Custom Carrying Case
    Surveying/Mapping Ground Station
    Instructions & Full Specs
     
    Flight time up to 20minutes.
     
    Specs:
     
    Weight - 4.7kg
    Max Weight - 5kg
    Payload - 1.1kg
    Max Payload - 1.3kg (reduced flight time) 
    Wind Resistance - 44.3738kmph - 68.5139kmph
    Voltage - 22.2v
    Max Watts - 1600w
     
     
    Upgrade Options:

    Lidar:
    RFD 900+ Long Range Telemetry
    1.3GHZ Long Range FPV
    433MHZ Long Range TX/RX
    Gimbal Encoders(Adding at least the yaw encoder gives you the ability to precisely control the gimbal from the GCS):
    Compatible With Other Sony Cameras:
    Pixhawk 2.1 Cube
     
    View Write Review
    Add to Cart
    $19,520.00
  • X8 336 Thermal Mapping Quadcopter Drone with RTK GNSS GPS (X8 336 Thermal Mapper )
     Aerial surveying/mapping quadcopter X8 drone with Flir 336 Pro, Sony A6000 camera, telemetry, FPV, aerial video downlink equipment and RTK GNSS GPS unit. This drone is ready to fly and includes - 650mm quadcopter X8 version carbon fiber foldable frame with landing gear, Pixhawk auto pilot flight controller, RTK GNSS GPS, Ublox M8N GPS with external compass,  GPS stands,  6pcs 6 cell 5200mah lipo batteries, 10ch 2.4GHZ TX & RX, 3DR Radio, Flir 336 Pro, Sony A6000 camera surveying camera, 3 axis brushless gimbal for sony A600, laptop ground station, custom carrying case, 7" FPV screen, video TX, OSD, Power Module with current and voltage sensor, low voltage alarm, buzzer, 8 - Blheli 30 amp ESC,Ubec, 8- 5010 brushless motors with 14*5 carbon fiber props and 6 LEDS on the rear of the drone.
     
     
    This thermal surveying/mapping quadcopter drone is fully configured out of the box and is capable of auto flight with waypoints, RTL and even follow me mode. The TX comes configured with six flight modes and 2 channels control the yaw and pitch of the gimbal. With the included Sony A6000 and Flir 336 Pro you can take professional aerial photos for surveying, mapping and geo-tagging images. The thermal camera automatically saves GPS coordinates to the EXIF data of the photo so it saves you time. To save even more time upgrade to the auto goe-tag module so you do not have to post process the images. When you land the photos will be automatically tagged. The RTK GNSS GPS gives you up to centimeter precision so you can create highly accurate 2D/3D maps. With the included ground station, you can easily create a autopilot mission to survey a piece of land. The ground station also features software to easily geo-tag aerial photos for 3d modeling. The hand-held transmitter gives you remote access to both cameras' shutter via a switch. The included 3DR radio and OSD will transmit flight data to the included 7" FPV and overlay it onto the live video feed from the Sony A6000 and Flir 336 Pro. You can change the live video transmission via a switch on the transmitter. There is an auxiliary port on the transmitter that can be programmed to change different settings on the thermal camera (e.g. color palettes, zoom etc.) The included 2.4ghz radio has built in telemetry so you can see the main lipo battery voltage,TX voltage,RX voltage and even RSSI on the radio screen. You can also use the awesome function Follow Me mode in Mission Planner. This is a very powerful and stable X8 quadcopter. Some of the benefits of  this X8 quadcopter is the ability to handle higher winds, higher altitudes, more power,more stable, longer flight times and even have 4 motor failsafe. That's right if four motors stop working you can safely land the drone as long as there is at least one motor working on each arm. Both beginners and advanced pilots will love to fly this drone and will have no problem learning all the features. 
     
    Some of the many uses of this X8 Surveying Drone include: 
     
    • Surveying
    • Search & Rescue
    • Aerial Photography
    • 3D Mapping 
    • Geo-tagging Photos
    • Real Estate
    • Inspections
    • Farming
    • Security
    • Anything Else You Can Dream Of
    •  

    X8 Thermal Surveying/Mapping Drone
    Package Contents you will receive: 

    Fully Assembled RTF 650mm X8 QuadCopter Carbon Fiber Frame 
    Pixhawk Auto Pilot Flight Controller 
    Protective Canopy
    M8P RTK GNSS GPS
    Ublox M8N GPS
    GPS Stand
    External Compass
    2.4GHZ 10ch TX with Telemetry
    2.4GHZ 10ch RX
    Sony A6000 Camera with 16-50mm Lens
    Flir Vue Pro 336
    7" 5.8ghz Diversity DVR FPV Screen
    Live Video Downlink
    OSD (On Screen Display)
    2 Channel Video Switch
    3 Axis Brushless Gimbal
    915MHZ 3DR Telemetry Radio
    Power Module with BEC -Voltage and Current Sensor
    Low Voltage Alarm
    LED orientation lights
    6pcs 6cell 5200mah Lipo Batteries (installed parallel)
    8pcs Blheli 30amp High Voltage ESC 
    8pcs 5010 Brushless Motors
    16pcs 14*5 Carbon Fiber Props (4-cw, 4ccw)
    Lipo Battery Fast Charger 
    Custom Carrying Case
    Surveying/Mapping Ground Station
    Instructions & Full Specs
     
    Flight time up to 20 minutes.
     
    Specs:
     
    Weight - 4.7kg
    Max Weight - 5kg
    Payload - 1.1kg
    Max Payload - 1.3kg (reduced flight time) 
    Wind Resistance - 44.3738kmph - 68.5139kmph
    Voltage - 22.2v
    Max Watts - 1600w
     
     
    Upgrade Options:

    Lidar:
    RFD 900+ Long Range Telemetry
    1.3GHZ Long Range FPV
    433MHZ Long Range TX/RX
    Auto Geo-Tag Module
    Gimbal Encoders(Adding at least the yaw encoder gives you the ability to precisely control the gimbal from the GCS):
    Compatible With Other Sony Cameras:
    View Write Review
    Add to Cart
    $16,770.00
  • X8 Titan RTK Mapping/Surveying Drone
    Sony A6000 3 Axis 32Bit FOC Gimbal With Encoders
    This is a professional 3 axis 32Bit gimbal with encoders for a Sony A6000 camera. We have added roll,pitch and yaw encoders to give the gimbal the best precision and stabilization. The encoders are As5048A via PWM and we also added a slip rings for 360 degree operation. This gimbal uses FOC specific compensations. With the encoders the gimbal uses 70% less power. The gimbal is all setup and tuned and includes the latest SimpleBGC encoder firmware. Includes a protective case and cable for power. We offer additional options that you can add to this gimbal like auto geo-tag, remote camera controls and HDMI video output.

    Specs:

    - 3pcs. 4108 Brushless Motors 
    - Roll/Pitch/Yaw - AS5048A Encoders
    - Roll/Pitch/Yaw Slip Rings
    - Support sensitivity parameters adjustment and software 3D display
    - Support joystick rate mode and position mode
    - Support receiver: normal receiver, PPM receiver, DSM2/ DSMJ/ DSMX receiver
    - Support remote control device: PPM/ PCM/ 2.3G
    - Working voltage: DC 7.4V-14.8V
    - Working current: 200mA-2
    - Processor: MEGA328P processor
    - Sensor: MPU6050 3 axis gyroscope, accelerator meter
    - Max angular speed rate: 2000degree/ SEC
    - Max accelerating speed: 16g
    - Control frequency: 1600Hz
    - Motor driving frequency: 8/32 KHz
    - Control precision: 0.1degree
    - Control angle range: -45---45degree (roll), -90---90degree (pitch)
    - Firmware: Simple_BGC 2.63b0
     

    Using encoders with gives the following advantages:

    1. Prevents motors from losing synchronization and skipping steps.
    2. Provides the information about frame angle and angle of the camera relative to frame, that can be important for some kind of applications.
    3. For many cases it can significantly decrease power consumption by using field-oriented control strategy to drive motors.
    4. Increases instant torque in the same way.
    5. Allows the controller to get information about the camera balance for automatic balancing (with help of extra DC servo motors and moving counterweights).
    6. The firmware also retains an option to adjust camera position by hands.
    7. Increases the precision of stabilization by applying FOC-specific compensations.

    Capabilities

    Possibility to manage the system on different platforms
    Desktop systems: Windows, macOS, Linux. The firmware of the controller is user upgradable (through the GUI).
    Smartphones: Android and some control from 3rd party vendors for Apple's iOS product (iPhone and iPad).

    Open Serial API
    Open programming interface for development of external control modules — both for software configuration and control of the board and for communication with various electronic devices.

    Automatic tuning of PID parameters
    Automatic tuning of PID parameters allows you to quickly prepare the system for work either at the initial settings or at changed conditions.

    Support of systems with various hardware configurations
    Flexible customization of the sensor orientation.
    Support for a wide range of motors of various configurations and sizes.
    Support several configurations of motor orders, including configurations with the tilted motor axes.

    Support for two IMU sensors and external IMU for maximum precision
    The system works with either one or two IMU sensors. The use of two sensors improves stability and accuracy in non-encoder version.
    Optional connection of a MavLink-enabled auto-pilot extends precision for demanding applications
     

    Support for wide range of absolute encoders
    Installing encoder on each motor greately improves system performance and extends the range of applications

    Different algorithms of follow mode
    Flexible configuration of the follow mode for each axis.  Automatic switching of horizon axis mode from lock to follow in case of persistent camera tilt.

    Up to five user-configurable modes of system operation selectable with a toggle button
    5 profiles grouped in 5 profile sets allows  changing modes of operation or even hardware configurations on-the-fly 

    Support of a wide range of external control protocols
    Futaba, Spektrum, 5x PWM, Sum-PPM, 3 ADC, Serial API
    Flexible configuration allows for control of any functions of the system (every parameter that the system uses is configurable).

    Battery voltage drop compensation
    Battery voltage drop compensation ensures proper control of the drive motors during the whole life of the battery.

    Different versions of the controllers for different needs
    The licensing system allowed our partners to launch different versions of controllers for a wide range of applications: from compact controllers for stabilizers of light cameras to powerful ones for the stabilization of heavy units.

    Ongoing work to improve the system
    BaseCam Electronics is working closely with the developers of end devices, which allows us, on the basis of feedback,  to continuously improve the stabilization algorithms and expand the capabilities of the system within a single version of the controller.

    View Write Review
    Add to Cart
    $2,499.00
  • X8 RTK Survey Drone
    X8 RTK Mapping Quadcopter Drone with RTK GNSS GPS (X8 RTK)
     Aerial surveying quadcopter X8 drone with Sony A6000 camera, telemetry, FPV, aerial video downlink equipment and RTK GNSS GPS unit. This drone is ready to fly and includes - 650mm quadcopter X8 carbon fiber foldable frame with landing gear, Pixhawk auto pilot flight controller, RTK GNSS GPS, Ublox M8N GPS with external compass,  GPS stands,  6pcs 6 cell 5200mah lipo batteries, 10ch 2.4GHZ TX & RX, 3DR Radio,Sony A6000 camera surveying camera, 3 axis brushless gimbal, laptop ground station, custom carrying case, 7" FPV screen, video TX, OSD, Power Module with current and voltage sensor, low voltage alarm, buzzer, 8 - Blheli 30 amp ESC,Ubec, 8- 5010 brushless motors with 14*5 carbon fiber props and 6 LEDS on the rear of the drone.
     
     
    This surveying/mapping quadcopter drone is fully configured out of the box and is capable of auto flight with waypoints, RTL and even follow me mode. The TX comes configured with six flight modes and 2 channels control the yaw and pitch of the gimbal. With the included Sony A6000 camera you can take professional aerial photos for surveying, mapping and geo-tagging images. To save time add the auto geo-tag module so you do not have to post process the images. The RTK GNSS GPS gives you up to centimeter precision so you can create highly accurate 2D/3D maps. With the included ground station, you can easily create a autopilot mission to survey a piece of land. The ground station also features software to easily geo-tag aerial photos for 3d modeling. The hand-held transmitter gives you remote access to the cameras' shutter via a switch. The included 3DR radio and OSD will transmit flight data to the included 7" FPV and overlay it onto the live video feed from the Sony A6000. The included 2.4ghz radio has built in telemetry so you can see the main lipo battery voltage,TX voltage,RX voltage and even RSSI on the radio screen. You can also use the awesome function Follow Me mode in Mission Planner. This is a very powerful and stable X8 quadcopter. Some of the benefits of  this X8 quadcopter is the ability to handle higher winds, higher altitudes, more power,more stable, longer flight times and even have 4 motor failsafe. That's right if four motors stop working you can safely land the drone as long as there is at least one motor working on each arm. Both beginners and advanced pilots will love to fly this drone and will have no problem learning all the features. 
     
    Some of the many uses of this X8 Surveying Drone include: 
     
    • Surveying
    • Aerial Photography
    • 3D Mapping 
    • Geo-tagging Photos
    • Real Estate
    • Inspections
    • Farming
    • Security
    • Anything Else You Can Dream Of
    •  

    X8 Surveyor Drone
    Package Contents you will receive: 

    Fully Assembled RTF 650mm X8 QuadCopter Carbon Fiber Frame 
    Pixhawk Auto Pilot Flight Controller 
    Protective Canopy
    M8P RTK GNSS GPS
    Ublox  M8N GPS
    GPS Stand
    External Compass
    2.4GHZ 10ch TX with Telemetry
    2.4GHZ 10ch RX
    Sony A6000 Camera with 16-50mm Lens
    7" 5.8ghz Diversity DVR FPV Screen
    5.8ghz Live Video Downlink
    OSD (On Screen Display)
    3 Axis Brushless Gimbal
    915MHZ 3DR Telemetry Radio
    Power Module with BEC -Voltage and Current Sensor
    Low Voltage Alarm
    LED orientation lights
    6pcs 6cell 5200mah Lipo Batteries (installed parallel)
    8pcs Blheli 30amp High Voltage ESC 
    8pcs 5010 Brushless Motors
    16pcs 14*5 Carbon Fiber Props (4-cw, 4ccw)
    Lipo Battery Fast Charger 
    Custom Carrying Case
    Surveying/Mapping Ground Station
    Instructions & Full Specs
     
    Flight time up to 20 minutes.
     
    Specs:
     
    Weight - 4.7kg
    Max Weight - 5kg
    Payload - 1kg
    Max Payload - 1.3kg (reduced flight time) 
    Wind Resistance - 44.3738kmph - 68.5139kmph
    Voltage - 22.2v
    Max Watts - 1600w
     
     
     
     
    View Write Review
    Add to Cart
    $14,070.00
  • 4k HD Thermal Imaging Hexacopter Drone
    4K HexaCopter Drone With Pixhawk (4K UHD X6)
    For sale is a custom built ready to fly aerial photography 4K UHD Hexacopter Multi-Rotor Drone with Pixhawk, FPV, telemetry, brushless gimbal, and 4K UHD camera. This drone is ready to fly and includes - 700mm carbon fiber foldable hexacopter frame, Pixhawk flight controller, Ublox M8N GPS with compass, GPS stand,  retractable landing gear, 3 axis 32bit brushless gimbal, 4K UHD camera, FPV 7" LCD screen with DVR, OSD, 5.8ghz video downlink, 6 cell 8000mah lipo battery, 10ch 2.4GHZ TX & RX, 3DR radio, power module with current and voltage sensor, low voltage alarm, buzzer, 6 - BLHELI high speed ESCs, 6 - 5010 360kv brushless motors with 14.5 carbon fiber props and 6 LEDS on the rear of the drone.
     
    This drone is fully configured out of the box and is capable of auto flight with waypoints, RTL and even follow me mode. The TX comes configured with six flight modes and 2 channels control the yaw and pitch of the gimbal. Another channel controls the retractable landing gear so you will have a clear view for the camera. The included 3DR radio and OSD will transmit flight data to included 7" FPV screen. With the 3DR radio you can use the function follow me. The 4K UHD camera will give you super high resolution aerial photos and videos. This Drone is a monster and has a lot of power with over a 2000 gram payload capacity but is very easy to fly. This drone can handle up to a micro DSLR size camera and gimbal (not included). Their are additional options that you can add to this Drone if you want to upgrade it in the future. 

     

    Package Contents you will receive: 

    Fully Assembled RTF 700mm HexaCopter Frame  
    Pixhawk Flight Controller (includes case)
    Retractable Landing Gear
    Ublox M8 GPS
    Foldable GPS Stand
    External Compass
    2.4GHZ 10ch Telemetry TX 
    2.4GHZ 10ch  Telemetry RX
    3 Axis 32bit Brushless Gimbal
    4K HD Camera With Live Video Feed To FPV Screen
    7" Diversity FPV DVR Screen
    Live Video Out Cable
    OSD(On Screen Display)
    600mw Video Downlink
    915MHZ 3DR Telemetry Radio
    Power Module with BEC -Voltage and Current Sensor
    Low Voltage Alarm
    Buzzer
    LED orientation lights
    UBEC
    2pcs 6 cell  8000mah Lipo Battery 
    6pcs BLHELI High Speed ESC
    6pcs 5010 360kv Brushless Motors 
    6pcs 14.5 TMotor Carbon Fiber Props (3-cw, 3ccw) 
    Lipo 200w Fast Charger
    Instructions
     
     
    With the included setup you will get up to 30 minute flight time.
    Please feel to contact us with any questions you may have. 
    View Write Review
    Add to Cart
    $4,000.00
  • X8 Titan RTK Mapping/Surveying Drone
    Sony A6000 3 Axis 32Bit Gimbal
    This is a great 3 axis 32Bit gimbal for a Sony A6000 camera. The gimbal is all setup and tuned and includes SimpleBGC 2.63b0 firmware. Includes a protective case and cable for power. We offer additional options that you can add to this gimbal like auto geo-tag, encoders, remote camera controls and HDMI video output.

    Specs:

    - 3pcs. 4108 Brushless Motors 
    - Support sensitivity parameters adjustment and software 3D display
    - Support joystick rate mode and position mode
    - Support receiver: normal receiver, PPM receiver, DSM2/ DSMJ/ DSMX receiver
    - Support remote control device: PPM/ PCM/ 2.3G
    - Working voltage: DC 7.4V-14.8V
    - Working current: 200mA-2
    - Processor: MEGA328P processor
    - Sensor: MPU6050 3 axis gyroscope, accelerator meter
    - Max angular speed rate: 2000degree/ SEC
    - Max accelerating speed: 16g
    - Control frequency: 1600Hz
    - Motor driving frequency: 8/32 KHz
    - Control precision: 0.1degree
    - Control angle range: -45---45degree (roll), -90---90degree (pitch)
    - Firmware: Simple_BGC 2.63b0

     

    Capabilities

    Possibility to manage the system on different platforms
    Desktop systems: Windows, macOS, Linux. The firmware of the controller is user upgradable (through the GUI).
    Smartphones: Android and some control from 3rd party vendors for Apple's iOS product (iPhone and iPad).

    Open Serial API
    Open programming interface for development of external control modules — both for software configuration and control of the board and for communication with various electronic devices.

    Automatic tuning of PID parameters
    Automatic tuning of PID parameters allows you to quickly prepare the system for work either at the initial settings or at changed conditions.

    Support of systems with various hardware configurations
    Flexible customization of the sensor orientation.
    Support for a wide range of motors of various configurations and sizes.
    Support several configurations of motor orders, including configurations with the tilted motor axes.

    Support for two IMU sensors and external IMU for maximum precision
    The system works with either one or two IMU sensors. The use of two sensors improves stability and accuracy in non-encoder version.
    Optional connection of a MavLink-enabled auto-pilot extends precision for demanding applications
     

    Support for wide range of absolute encoders
    Installing encoder on each motor greately improves system performance and extends the range of applications

    Different algorithms of follow mode
    Flexible configuration of the follow mode for each axis.  Automatic switching of horizon axis mode from lock to follow in case of persistent camera tilt.

    Up to five user-configurable modes of system operation selectable with a toggle button
    5 profiles grouped in 5 profile sets allows  changing modes of operation or even hardware configurations on-the-fly 

    Support of a wide range of external control protocols
    Futaba, Spektrum, 5x PWM, Sum-PPM, 3 ADC, Serial API
    Flexible configuration allows for control of any functions of the system (every parameter that the system uses is configurable).

    Battery voltage drop compensation
    Battery voltage drop compensation ensures proper control of the drive motors during the whole life of the battery.

    Different versions of the controllers for different needs
    The licensing system allowed our partners to launch different versions of controllers for a wide range of applications: from compact controllers for stabilizers of light cameras to powerful ones for the stabilization of heavy units.

    Ongoing work to improve the system
    BaseCam Electronics is working closely with the developers of end devices, which allows us, on the basis of feedback,  to continuously improve the stabilization algorithms and expand the capabilities of the system within a single version of the controller.

    View Write Review
    Add to Cart
    $1,039.99
  • Aerial Photography Quadcopoter Drone with Auto Pilot
    This is a fully assembled ready to fly high voltage 6 cell version Aerial Photography Quadcopoter Drone with Auto Pilot APM flight controller, Telemetry and everything you need to take professional aerial photography. This quadcopter is very powerful and is for advanced pilots who want long flight time and unlimited power. This drone is fully autonomous including mission planning with waypoints and folow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, HD camera and telemetry. Everything is already configured for you and it is basically ready to fly out of the box. Like always free shipping to USA customers. 

    Aerial Photography Quadcopoter Drone with Auto Pilot Includes:
    • 580mm Quadcopter Foldable Aluminum Frame
    • Landing Gear
    • APM  Auto Pilot Flight Ccontroller 
    • 8ch 2.4ghz TX
    • 8ch 2.4ghz RX
    • 6MGPS
    • External Compass
    • Professional 3 Axis Brushless Gimbal
    • SJcam4000 HD Camera With Live Video Out Cable
    • 200mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz FPV Screen 
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 2pcs 3cell 5000mah Lipos in Series= 6 Cell 5000mah Lipo
    • LED lights
    • 4pcs 5010 400KV Brushless Motors
    • Upgraded Aluminum Motor Mounts
    • 4pcs HV 30amp Simonk(Rapid ECS) ESC
    • 4pcs 12x5.5  Carbon Fiber Props. 
    • APM Buzzer With Low Voltage Alarm
    • HV Power Module With Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • 1 - 6 Cell Lipo Balance Charger
    Flight time is about 25 minutes with the included setup. 

    Photo is for illustration purposes. 
    View Write Review
    Add to Cart
    $1,690.00
  • 650mm HexaCopter W/Pixhawk/Telemetry/Aerial Video Setup
    This is a fully assembled ready to fly High Voltage 6 cell version 650mm aluminum frame drone with Pixhawk flight controller, Telemetry and everything you need to take professional aerial photography. This hexacopter is very powerful and is for advanced pilots who want long flight time and unlimited power. This drone is fully autonomous including mission planning with waypoints and follow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, HD camera,telemetry and even a retractable landing gear. This package includes upgraded 10 channel 2.4ghz TX and RX.  Everything is already configured for you and it is basically ready to fly out of the box. Like always free shipping to USA customers. 

    Included in this package:
    • 650mm Hexacopter Foldable Aluminum Frame
    • Retractable Landing Gear
    • Pixhawk Auto Pilot Flight Ccontroller 
    • 10ch 2.4ghz TX
    • 10ch 2.4ghz RX
    • 6M GPS
    • External Compass
    • Carbon Fiber Pattern Canopy
    • Professional 3 Axis Brushless Gimbal
    • SJcam4000 HD Camera With Live Video Out Cable
    • 200mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz FPV Screen 
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 2pcs 3cell 5000mah Lipos in Series= 6 Cell 5000mah Lipo
    • LED lights
    • 4pcs 5010 400KV Brushless Motors
    • 4pcs HV 30amp Simonk(Rapid ECS) ESC
    • 4pcs 12x5.5  Carbon Fiber Props. 
    • HV Power Module With Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • 1 - 6 Cell Lipo Balance Charger
    Flight time is about 30 minutes with the included setup. You can upgrade to a bigger battery for longer flight times.
    View Write Review
    Add to Cart
    $2,970.00
    $3,170.00
  • X8 Titan RTK Mapping/Surveying Drone
    Sony A6000 3 Axis 32Bit Gimbal With Yaw Encoder
    This is a great 3 axis 32Bit gimbal for a Sony A6000 camera. We have added a yaw encoder to give the gimbal more advantages. The yaw encoder is a As5048A via PWM and we also added a slip ring for 360 degree operation. The gimbal is all setup and tuned and includes SimpleBGC 2.63b0 firmware. Includes a protective case and cable for power. We offer additional options that you can add to this gimbal like auto geo-tag, remote camera controls and HDMI video output

    Specs:

    - 3pcs. 4108 Brushless Motors 
    - AS5048A Yaw Encoder
    - Yaw Encoder Slip Ring
    - Support sensitivity parameters adjustment and software 3D display
    - Support joystick rate mode and position mode
    - Support receiver: normal receiver, PPM receiver, DSM2/ DSMJ/ DSMX receiver
    - Support remote control device: PPM/ PCM/ 2.3G
    - Working voltage: DC 7.4V-14.8V
    - Working current: 200mA-2
    - Processor: MEGA328P processor
    - Sensor: MPU6050 3 axis gyroscope, accelerator meter
    - Max angular speed rate: 2000degree/ SEC
    - Max accelerating speed: 16g
    - Control frequency: 1600Hz
    - Motor driving frequency: 8/32 KHz
    - Control precision: 0.1degree
    - Control angle range: -45---45degree (roll), -90---90degree (pitch)
    - Firmware: Simple_BGC 2.63b0
     

    Using encoders with gives the following advantages:

    1. Prevents motors from losing synchronization and skipping steps.
    2. Provides the information about frame angle and angle of the camera relative to frame, that can be important for some kind of applications.
    3. For many cases it can significantly decrease power consumption by using field-oriented control strategy to drive motors.
    4. Increases instant torque in the same way.
    5. Allows the controller to get information about the camera balance for automatic balancing (with help of extra DC servo motors and moving counterweights).
    6. The firmware also retains an option to adjust camera position by hands.
    7. Increases the precision of stabilization by applying FOC-specific compensations.

    Capabilities

    Possibility to manage the system on different platforms
    Desktop systems: Windows, macOS, Linux. The firmware of the controller is user upgradable (through the GUI).
    Smartphones: Android and some control from 3rd party vendors for Apple's iOS product (iPhone and iPad).

    Open Serial API
    Open programming interface for development of external control modules — both for software configuration and control of the board and for communication with various electronic devices.

    Automatic tuning of PID parameters
    Automatic tuning of PID parameters allows you to quickly prepare the system for work either at the initial settings or at changed conditions.

    Support of systems with various hardware configurations
    Flexible customization of the sensor orientation.
    Support for a wide range of motors of various configurations and sizes.
    Support several configurations of motor orders, including configurations with the tilted motor axes.

    Support for two IMU sensors and external IMU for maximum precision
    The system works with either one or two IMU sensors. The use of two sensors improves stability and accuracy in non-encoder version.
    Optional connection of a MavLink-enabled auto-pilot extends precision for demanding applications
     

    Support for wide range of absolute encoders
    Installing encoder on each motor greately improves system performance and extends the range of applications

    Different algorithms of follow mode
    Flexible configuration of the follow mode for each axis.  Automatic switching of horizon axis mode from lock to follow in case of persistent camera tilt.

    Up to five user-configurable modes of system operation selectable with a toggle button
    5 profiles grouped in 5 profile sets allows  changing modes of operation or even hardware configurations on-the-fly 

    Support of a wide range of external control protocols
    Futaba, Spektrum, 5x PWM, Sum-PPM, 3 ADC, Serial API
    Flexible configuration allows for control of any functions of the system (every parameter that the system uses is configurable).

    Battery voltage drop compensation
    Battery voltage drop compensation ensures proper control of the drive motors during the whole life of the battery.

    Different versions of the controllers for different needs
    The licensing system allowed our partners to launch different versions of controllers for a wide range of applications: from compact controllers for stabilizers of light cameras to powerful ones for the stabilization of heavy units.

    Ongoing work to improve the system
    BaseCam Electronics is working closely with the developers of end devices, which allows us, on the basis of feedback,  to continuously improve the stabilization algorithms and expand the capabilities of the system within a single version of the controller.

    View Write Review
    Add to Cart
    $1,449.99
  • Thermal Imaging Quadcopter Drone with Pixhawk X8 640 (X8 Predator)
    This is a fully assembled ready to fly X8 Thermal Imaging Quadcopter Drone with Auto Pilot. This quadcopter drone is very powerful and is for advanced pilots who want long flight time and unlimited power. The possibilities are endless with the included thermal imaging camera. This drone is fully autonomous including mission planning with waypoints and follow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, Flir Vue 640 thermal camera, HD camera, and telemetry. This package includes upgraded 10 channel 2.4ghz TX and RX.  The X8 configuration gives you a 4 motor fail-safe feature. If 4 out of the 8 motors stop working you can still safely land the copter as long as no 2 motors on the same arm stop working. The benefits of X8 configurations include 4 motor fail-safe, more power, longer flight times, withstand higher winds and altitudes and more stable. Everything is already configured for you and it is basically ready to fly out of the box. There are many uses for this drone including search and rescue, inspections, hunting, farming and many other uses. 

    Thermal Imaging Quadcopter Drone with Auto Pilot Includes:
     
    • 650mm Quadcopter Foldable Carbon Fiber Frame X8 Configuration
    • Pixhawk Auto Pilot Flight Controller 
    • 10ch 2.4ghz TX
    • 10ch 2.4ghz RX
    • 8M GPS
    • External Compass
    • Carbon Fiber Pattern Canopy
    • Professional 3 Axis Brushless Gimbal
    • SJcam 4000 HD Camera With Live Video Out Cable
    • Flir Vue 640 Thermal Camera
    • 600mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz Diversity FPV DVR Screen 
    • Video Switcher
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 2 pcs 6 Cell 8000mah Lipo
    • LED lights
    • 8pcs 5010 400KV Brushless Motors
    • 8pcs HV 30amp Simonk(Rapid ECS) ESC
    • 8pcs 13x5.5  Carbon Fiber Props. 
    • HV Power Module With Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • 1 - 6 Cell Lipo Balance Charger
    Flight time is about 30 minutes with the included setup. You can upgrade to a bigger battery for longer flight times. Like always free shipping to USA customers. 
    View Write Review
    Add to Cart
    $10,970.00
  • DSLR Quadcopter Drone Autopilot Pixhawk/Telemetry/Mini DSLR Gimbal
    This is a fully assembled ready to fly 4 cell version quadcopter drone with Pixhawk autopilot flight controller, Telemetry and mini 3 axis DSLR gimbal . This quadcopter is powerful and is for advanced pilots who want long flight time and lots of power. This drone is fully autonomous including mission planning with waypoints and follow me mode. This is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home),Loiter and Auto Pilot. Everything is already configured for you and it is ready to fly out of the box. This flight controller uses the program Mission Planner to plan missions and change settings.  Like always free shipping to USA customers. 

    Included in this package:
    • 580mm Quadcopter Foldable Aluminum Frame
    • Carbon Fiber Landing Gear
    • Pixhawk Auto Pilot Flight Controller 
    • 8ch 2.4ghz TX
    • 8ch 2.4ghz RX
    • 6MGPS
    • External Compass
    • Professional 3 Axis Brushless DSLR Gimbal
    • 915mhz 3DR Telemetry Radios
    • 4cell 5000mah Lipo
    • LED lights
    • 4pcs 5010 750KV Brushless Motors
    • 4pcs 25amp Simonk(Rapid ECS) ESC
    • 4pcs 12x4.5  Carbon Fiber Props. 
    • Pixhawk Buzzer With Low Voltage Alarm
    • Power Module With Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • Pixhawk External LED
    • Safety Switch
    • 1 - 6 Cell Lipo Balance Charger
     
    View Write Review
    Add to Cart
    $1,770.00
  • HexaCopter Drone with Auto Pilot
    This is a fully assembled ready to fly HexaCopter Drone with Auto Pilot APM flight controller and telemetry. This drone is fully autonomous including mission planning with waypoints. This is a super stable and easy to fly drone.  Some functions include 6 programmed flight modes including RTL(return home) and Alt Hold. If you add a bluetooth or 3dr radio, this drone is capable of follow me mode. This is a professional hexacopter drone that is very powerful  Everything is already configured for you and it is basically ready to fly out of the box. Like always free shipping to USA customers.

    HexaCopter Drone with Auto Pilot Includes:
    • 650mm Hexacopter Aluminum Foldable Frame
    • Landing gear
    • APM 2.6 FC
    • 8ch 2.4ghz TX
    • 8ch 2.4ghz RX
    • Ublox 6m GPS
    • External Compass
    • PPM Encoder
    • Power Module(Voltage /Current Sensor)
    • 2pcs 4 cell 5000mah Lipo Battery
    • LED Lights
    • 6pcs 5010 750KV brushless motors
    • 6pcs 30amp Simonk(Rapid ESC) ESC
    • 6pcs 12x4.5 Carbon Fiber Props. 
    • APM Buzzer
    • Aux Power Ports
    • 915MHZ 3DR Telemetry Radios
    • 1-6cell 50watt Quick Charger/Balancer
    View Write Review
    Add to Cart
    $1,650.00
Per Page      1 - 13 of 13