Thermal Imaging

Thermal Imaging Drones/UAVs
Sort By:  
  • Thermal Imaging Quadcopter Drone with AutoPilot X4 336 (X4 Predator)
    This is a fully assembled ready to fly X4 Thermal Imaging Quadcopter Drone with Auto Pilot. This quadcopter drone is powerful and is for advanced pilots who want longer flight time. The possibilities are endless with the included thermal imaging camera. This drone is fully autonomous including mission planning with waypoints and follow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, Flir Vue 336 thermal camera, HD camera, and telemetry. This package includes upgraded 10 channel 2.4ghz TX and RX. Everything is already configured for you and it is basically ready to fly out of the box. There are many uses for this drone including search and rescue, inspections, hunting, farming and many other uses. 

    Thermal Imaging Quadcopter Drone with Auto Pilot Includes:
     
    • 650mm Quadcopter Foldable Carbon Fiber Frame X4 Configuration
    • Pixhawk Auto Pilot Flight Controller 
    • 10ch 2.4ghz TX
    • 10ch 2.4ghz RX
    • 8M GPS
    • External Compass
    • Protective Canopy
    • Professional 3 Axis Brushless Gimbal
    • SJcam 4000 HD Camera With Live Video Out Cable
    • Flir Vue 336 Thermal Camera
    • 600mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz FPV Screen 
    • Video Switcher
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 2 pcs 4 Cell 5000mah Lipo
    • LED lights
    • 4pcs 5010 750KV Brushless Motors
    • 4pcs 25amp Simonk(Rapid ECS) ESC
    • 4pcs 13x5.5  Carbon Fiber Props. 
    • Power Module with Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • 1 - 6 Cell Lipo Balance Charger
    Flight time is about 20 minutes with the included setup. You can upgrade to a bigger battery for longer flight times. Like always free shipping to USA customers. 
    Add to Cart
    $6,320.00
  • Thermal Imaging QuadCopter Drone / Flir Lepton
    Thermal Imaging Quadcopter Drone with AutoPilot X4 80 (X4 NightOwl)

    This is a fully assembled ready to fly X4 Thermal Imaging Quadcopter Drone with Auto Pilot. This is a entry level thermal imaging quadcopter drone. The possibilities are endless with the included thermal imaging camera. This drone is fully autonomous including mission planning with waypoints and follow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, Flir Lepton thermal camera, telemetry and 8 channel 2.4ghz TX and RX. Everything is already configured for you and it is basically ready to fly out of the box. There are many uses for this drone including search and rescue, inspections, hunting, farming and many other uses. The Flir Lepton that is included with this drone has a much lower resolution compared to the Flir Vues. This drone is great for up close inspections with the thermal camera( <40' ). If you need a higher resolution thermal camera that works better at higher altitudes then check out the Flue Vue 336 or 640. This is our base model thermal imaging drone. 

    Thermal Imaging Quadcopter Drone with Auto Pilot Includes:

    • 580mm Quadcopter Foldable Aluminum X4 Configuration

    • APM Auto Pilot Flight Controller 

    • 8ch 2.4ghz TX

    • 8ch 2.4ghz RX

    • 6M GPS

    • External Compass

    • Protective Canopy

    • Flir Lepton Thermal Camera

    • 600mw 5.8ghz Video Transmitter

    • 7" LED 5.8ghz FPV Screen 

    • OSD - On Screen Display

    • FPV Screen Mount For Transmitter

    • 915mhz 3DR Telemetry Radios

    • 2 pcs 3 Cell 5000mah Lipo

    • LED lights

    • 4pcs 2212 920KV Brushless Motors

    • 4pcs 25amp Simonk(Rapid ECS) ESC

    • 4pcs 10X4.5 Carbon Fiber Props. 

    • Power Module with Current and Voltage Sensor

    • PPM Encoder

    • Aux Power Ports

    • 1 - 6 Cell Lipo Balance Charger

    Flight time is about 15 minutes with the included setup. Like always free shipping to USA customers.

     

    Add to Cart
    $2,700.00
    $3,000.00
  • Thermal Imaging Quadcopter Drone with AutoPilot X8 336 (X8 Predator)
    This is a fully assembled ready to fly X8 Thermal Imaging Quadcopter Drone with Auto Pilot. This quadcopter drone is very powerful and is for advanced pilots who want long flight time and unlimited power. The possibilities are endless with the included thermal imaging camera. This drone is fully autonomous including mission planning with waypoints and follow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, Flir Vue 336 thermal camera, HD camera, and telemetry. This package includes upgraded 10 channel 2.4ghz TX and RX.  The X8 configuration gives you a 4 motor fail-safe feature. If 4 out of the 8 motors stop working you can still safely land the copter as long as no 2 motors on the same arm stop working. The benefits of X8 configurations include 4 motor fail-safe, more power, longer flight times, withstand higher winds and altitudes and more stable. Everything is already configured for you and it is basically ready to fly out of the box. There are many uses for this drone including search and rescue, inspections, hunting, farming and many other uses. 

    Thermal Imaging Quadcopter Drone with Auto Pilot Includes:
     
    • 650mm Quadcopter Foldable Carbon Fiber Frame X8 Configuration
    • Pixhawk Auto Pilot Flight Controller 
    • 10ch 2.4ghz TX
    • 10ch 2.4ghz RX
    • 8M GPS
    • External Compass
    • Carbon Fiber Pattern Canopy
    • Professional 3 Axis Brushless Gimbal
    • SJcam 4000 HD Camera With Live Video Out Cable
    • Flir Vue 336 Thermal Camera
    • 600mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz FPV Screen 
    • Video Switcher
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 2 pcs 6 Cell 8000mah Lipo
    • LED lights
    • 8pcs 5010 400KV Brushless Motors
    • 8pcs HV 30amp Simonk(Rapid ECS) ESC
    • 8pcs 13x5.5  Carbon Fiber Props. 
    • HV Power Module With Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • 1 - 6 Cell Lipo Balance Charger
    Flight time is about 30 minutes with the included setup. You can upgrade to a bigger battery for longer flight times. Like always free shipping to USA customers. 
    Add to Cart
    $7,970.00
  • Thermal Imaging Quadcopter Drone with Auto Pilot X8 640 (X8 Predator)
    This is a fully assembled ready to fly X8 Thermal Imaging Quadcopter Drone with Auto Pilot. This quadcopter drone is very powerful and is for advanced pilots who want long flight time and unlimited power. The possibilities are endless with the included thermal imaging camera. This drone is fully autonomous including mission planning with waypoints and follow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, Flir Vue 640 thermal camera, HD camera, and telemetry. This package includes upgraded 10 channel 2.4ghz TX and RX.  The X8 configuration gives you a 4 motor fail-safe feature. If 4 out of the 8 motors stop working you can still safely land the copter as long as no 2 motors on the same arm stop working. The benefits of X8 configurations include 4 motor fail-safe, more power, longer flight times, withstand higher winds and altitudes and more stable. Everything is already configured for you and it is basically ready to fly out of the box. There are many uses for this drone including search and rescue, inspections, hunting, farming and many other uses. 

    Thermal Imaging Quadcopter Drone with Auto Pilot Includes:
     
    • 650mm Quadcopter Foldable Carbon Fiber Frame X8 Configuration
    • Pixhawk Auto Pilot Flight Controller 
    • 10ch 2.4ghz TX
    • 10ch 2.4ghz RX
    • 8M GPS
    • External Compass
    • Carbon Fiber Pattern Canopy
    • Professional 3 Axis Brushless Gimbal
    • SJcam 4000 HD Camera With Live Video Out Cable
    • Flir Vue 640 Thermal Camera
    • 600mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz Diversity FPV DVR Screen 
    • Video Switcher
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 2 pcs 6 Cell 8000mah Lipo
    • LED lights
    • 8pcs 5010 400KV Brushless Motors
    • 8pcs HV 30amp Simonk(Rapid ECS) ESC
    • 8pcs 13x5.5  Carbon Fiber Props. 
    • HV Power Module With Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • 1 - 6 Cell Lipo Balance Charger
    Flight time is about 30 minutes with the included setup. You can upgrade to a bigger battery for longer flight times. Like always free shipping to USA customers. 
    Add to Cart
    $10,970.00
  • Thermal Imaging Quadcopter Drone with AutoPilot X4 80 (X4 Predator)
    This is a fully assembled ready to fly X4 Thermal Imaging Quadcopter Drone with Auto Pilot. This quadcopter drone is powerful and is for advanced pilots who want longer flight time. The possibilities are endless with the included thermal imaging camera. This drone is fully autonomous including mission planning with waypoints and follow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, Flir Lepton thermal camera, HD camera, and telemetry. This package includes upgraded 10 channel 2.4ghz TX and RX. Everything is already configured for you and it is basically ready to fly out of the box. There are many uses for this drone including search and rescue, inspections, hunting, farming and many other uses. The Flir Lepton that is included with this drone has a much lower resolution compared to the Flir Vues. This drone is great for up close inspections with the thermal camera( <40' ). If you need a higher resolution thermal camera that works better at higher altitudes then check out the Flue Vue 336 or 640.

    Thermal Imaging Quadcopter Drone with Auto Pilot Includes:
     
    • 650mm Quadcopter Foldable Carbon Fiber Frame X4 Configuration
    • Pixhawk Auto Pilot Flight Controller 
    • 10ch 2.4ghz TX
    • 10ch 2.4ghz RX
    • 8M GPS
    • External Compass
    • Protective Canopy
    • Professional 3 Axis Brushless Gimbal
    • SJcam 4000 HD Camera With Live Video Out Cable
    • Flir Lepton Thermal Camera
    • 600mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz FPV Screen 
    • Video Switcher
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 2 pcs 4 Cell 5000mah Lipo
    • LED lights
    • 4pcs 5010 750KV Brushless Motors
    • 4pcs 25amp Simonk(Rapid ECS) ESC
    • 4pcs 13x5.5  Carbon Fiber Props. 
    • Power Module with Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • 1 - 6 Cell Lipo Balance Charger
    Flight time is about 20 minutes with the included setup. You can upgrade to a bigger battery for longer flight times. Like always free shipping to USA customers. 
    Add to Cart
    $4,850.00
  • Thermal Imaging Quadcopter Drone with AutoPilot X4 640 (X4 Predator )
    This is a fully assembled ready to fly X4 Thermal Imaging Quadcopter Drone with Auto Pilot. This quadcopter drone is powerful and is for advanced pilots who want longer flight time. The possibilities are endless with the included thermal imaging camera. This drone is fully autonomous including mission planning with waypoints and follow me mode. This  is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, Flir Vue 640 thermal camera, HD camera, and telemetry. This package includes upgraded 10 channel 2.4ghz TX and RX. Everything is already configured for you and it is basically ready to fly out of the box. There are many uses for this drone including search and rescue, inspections, hunting, farming and many other uses. 

    Thermal Imaging Quadcopter Drone with Auto Pilot Includes:
     
    • 650mm Quadcopter Foldable Carbon Fiber Frame X4 Configuration
    • Pixhawk Auto Pilot Flight Controller 
    • 10ch 2.4ghz TX
    • 10ch 2.4ghz RX
    • 8M GPS
    • External Compass
    • Protective Canopy
    • Professional 3 Axis Brushless Gimbal
    • SJcam 4000 HD Camera With Live Video Out Cable
    • Flir Vue 640 Thermal Camera
    • 600mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz FPV Screen 
    • Video Switcher
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 2 pcs 4 Cell 5000mah Lipo
    • LED lights
    • 4pcs 5010 750KV Brushless Motors
    • 4pcs 25amp Simonk(Rapid ECS) ESC
    • 4pcs 13x5.5  Carbon Fiber Props. 
    • Power Module with Current and Voltage Sensor
    • PPM Encoder
    • Aux Power Ports
    • 1 - 6 Cell Lipo Balance Charger
    Flight time is about 20 minutes with the included setup. You can upgrade to a bigger battery for longer flight times. Like always free shipping to USA customers. 
    Add to Cart
    $8,320.00
  • Thermal X8 640 R Drone
    Thermal Imaging X8 Quadcopter Drone with Auto Pilot X8 640 R (X8 Predator 640 R)
    This is a fully assembled ready to fly X8 Thermal Imaging X8 Quadcopter Drone with Auto PilotThis quadcopter drone is very powerful and is for advanced pilots who want long flight time and unlimited power. The possibilities are endless with the included thermal imaging camera. This drone is fully autonomous including mission planning with waypoints and follow me mode. This is a very stable and easy to fly drone. Some functions include 6 programmed flight modes including RTL(return home) and Loiter. This setup includes 5.8ghz FPV equipment, 3 axis brushless gimbal, Flir Vue Pro 640 R thermal camera with radiometrics, 4K UHD camera, and telemetry. The video downlink transmits the live video from the thermal sensor and 4K camera to the FPV screen. The OSD overlays telemetry flight data onto the live video feed. Switch between the video from the thermal sensor and 4K camera via a switch on the transmitter. The high resolution thermal sensor has 2 auxiliary channels so you can change color palettes and start and stop recording remotely from the transmitter. With the thermal sensors' radiometrics you view live temperature readings right on the FPV screen and the sensor saves temperature data to the images it takes. The thermal sensor also saves GPS coordinates to every picture it takes. This package includes upgraded 10 channel  telemetry 2.4ghz TX and RX. The X8 configuration gives you a 4 motor fail-safe feature. If 4 out of the 8 motors stop working you can still safely land the copter as long as no 2 motors on the same arm stop working. The benefits of X8 configurations include 4 motor fail-safe, more power, longer flight times, withstand higher winds and altitudes and more stable. Everything is already configured for you and it is basically ready to fly out of the box. There are many uses for this drone including search and rescue, inspections, hunting, farming and many other uses. 

    Thermal Imaging X8 Quadcopter Drone with Auto Pilot Includes:
     
    • 650mm Quadcopter Foldable Carbon Fiber Frame X8 Configuration
    • Pixhawk Auto Pilot Flight Controller 
    • 10ch 2.4ghz TX With Telemetry
    • 10ch 2.4ghz RX With Telemetry
    • M8N GPS
    • External Compass
    • Protective Canopy
    • Professional 3 Axis Brushless Gimbal
    • 4K UHD Camera With Live Video Out Cable
    • Flir Vue Pro 640 R Thermal Camera With Raidometrics
    • 600mw 5.8ghz Video Transmitter
    • 7" LED 5.8ghz Diversity FPV DVR Screen 
    • Video Switcher
    • OSD - On Screen Display
    • FPV Screen Mount For Transmitter
    • 915mhz 3DR Telemetry Radios
    • 4 pcs 4 Cell 16000mah Lipo
    • LED lights
    • 8pcs 5010 Brushless Motors
    • 8pcs HV 30amp Simonk(Rapid ECS) ESC
    • 8pcs 15x5.5  Carbon Fiber Props. 
    • HV Power Module With Current and Voltage Sensor
    • 200w Rapid Balance Charger
    • Custom Carrying Case
    Flight time is about 25 minutes with the included setup. You can upgrade to a bigger battery for longer flight times. Like always free shipping to USA customers. 
    Add to Cart
    $12,270.00
  • 4k HD Thermal Imaging Hexacopter Drone
    4K UHD Thermal Imaging HexaCopter Drone With Autopilot (4K Thermal X6 80)
    For sale is a custom built ready to fly aerial photography 4K UHD Hexacopter Multi-Rotor Drone with Pixhawk, FPV, telemetry, brushless gimbal, 4K UHD camera and micro thermal imaging camera. This drone is ready to fly and includes - 700mm carbon fiber foldable hexacopter frame, Pixhawk flight controller, Ublox M8N GPS with compass, GPS stand,  retractable landing gear, 3 axis brushless gimbal, 4K UHD camera, Micro themal camera, FPV 7" LCD screen with DVR, OSD, video switch, video downlink, 6 cell 8000mah lipo battery, 10ch 2.4GHZ TX & RX, 3DR radio, power module with current and voltage sensor, low voltage alarm, buzzer, 6 - BLHELI high speed ESCs, 6 - 5010 360kv brushless motors with 14.5 carbon fiber props and 6 LEDS on the rear of the drone.
     
    This drone is fully configured out of the box and is capable of auto flight with waypoints, RTL and even follow me mode. The TX comes configured with six flight modes and 2 channels control the yaw and pitch of the gimbal. Another channel controls the retractable landing gear so you will have a clear view for the camera. The included 3DR radio and OSD will transmit flight data to the 7" FPV screen. With the 3DR radio you can use the function follow me or to plan autopilot missions. You can switch between the two cameras via a switch on the transmitter. The thermal imaging camera will let you see in daylight or night time with predator like vision. The 4K UHD camera will give you super high resolution aerial photos and videos. This Drone is a monster and has a lot of power with over a 2000 gram payload capacity but is very easy to fly. This drone can handle up to a micro DSLR size camera and gimbal (not included). Their are additional options that you can add to this Drone if you want to upgrade it in the future. 

     

    Package Contents you will receive: 

    Fully Assembled RTF 700mm HexaCopter Frame  
    Pixhawk Flight Controller (includes case)
    Retractable Landing Gear
    Ublox M8N GPS
    Foldable GPS Stand
    External Compass
    2.4GHZ 10ch Telemetry TX 
    2.4GHZ 10ch  Telemetry RX
    3 Axis 32bit Brushless Gimbal
    4K HD Camera With Live Video Feed To FPV Screen
    Micro Thermal Camera With Live Video To FPV Screen
    7" Diversity FPV DVR Screen
    Live Video Out Cable
    OSD(On Screen Display)
    600mw Video Downlink
    915MHZ 3DR Telemetry Radio
    Power Module with BEC -Voltage and Current Sensor
    Low Voltage Alarm
    Buzzer
    LED orientation lights
    UBEC
    2pcs 6 cell  8000mah Lipo Battery 
    6pcs BLHELI High Speed ESC
    6pcs 5010 360kv Brushless Motors 
    6pcs 14.5 TMotor Carbon Fiber Props (3-cw, 3ccw) 
    Lipo Fast Charger
    Custom Carrying Case
    Instructions
     
     
    With the included setup you will get up to 30 minute flight time.
    Please feel to contact us with any questions you may have. 
    Add to Cart
    $5,490.00
Per Page      1 - 8 of 8